Kubota Tractor BX Series Front Receiver Hitch - Can also custom build for others

Description

This is a  2 inch Receiver hitch made to bolt right onto the front of your Kubota BX series tractor.
If you have a front end loader, check for clearance after install.
The 1/2 holes are drilled on a 6 7/16 x 1 13/16 inch pattern. The mounting plate is Angle iron 2 inch by 3 inch by 8 inches long - 3/16 thick.  The hitch you will be getting is the same size but way better than the one shown in the listing picture. I have had problems with copycat builders so I changed my design and it is for the better.  Tow loop is welded on. Insert is included. There is 2 holes on the insert. One is for permanent mount of your tow ball  (drilled for a 3/4 shank) -  and  the one at the end is for 1/2 inch pin type hookups.  If you are wondering why you need a hitch on the front, it it a lot easier to back your trailers into tight spots this way versus over the shoulder backing. The 1/2 inch tow loop on the front also makes a sweet anchor point when trailering your machine. You get everything pictured except the tow ball and mount bolts. The front brush guard is NOT included. I build my hitches to do the job. No short cuts and all heavy welds. It is important to me to get your hitch to you as soon as possible. I do my shipping every evening and your item will ship next morning USPS Priority mail.  This hitch is not built for or recommended for automotive use. Any questions please ask, always glad to answer.  Thank you - Andy